Table of Contents
Advertisement
Example1
（Always compare except "near zero" ± 20 digits and digitally input reference
value and scope.）
Selecting a comparator mode (Input scope, comparison criteria and value.)
1. Press and hold the SAMPLE key (for 2 seconds) until
1ba5fnc
of the function table is displayed, then release the
key.
2. Press the SAMPLE key several times to display
3. Press the PRINT key.
4. Press the RE-ZERO key several times to display
( " " always compare).
5.
Press the SAMPLE key several times to display
6.
Press the RE-ZERO key several times to display
( "
" ± 20 digit is not compared.)
7. Press the SAMPLE key several times to move to
8. Press the RE-ZERO key several times to display
( "
" reference value is set. digital input)
9. Press the PRINT key to store the selected mode.
Cp fnc .
.
62
.
3
0
Cpin .
2
.
Keep pressing and holding
(for 2 seconds)
Press several times
Press several times
all
Press several times
10d
Press several times
20d
Press several times
Press several times
Advertisement
Table of Contents
