7-1 Recording Impact History
Impacts of impact level 3 or higher are stored on the balance with data and time included (maximum
50 data instances).
When the password lock function is on ( LOcK 1 or Lock2 ), the login user information is added when
outputting the impact history.
Note
□ If 50 data instances is exceeded, the data with the lowest impact level is overwritten.
□ The stored impact history cannot be deleted.
□ Impact data where the balance is not energized (during transport, etc.) is not stored.
7-2 Output Impact History
The stored impact history can be output by sending a specified command to the balance or performing
a key operation.
Output by command
The stored impact data will be output all at once by sending a ?SA command to the balance.
Output by key operation
1. Press the ON:OFF
2. With the display off, press the
while holding down the
3.
is displayed, and the stored impact
data is output all at once.
key to turn off the display.
ON:OFF key
MODE key.
31
Press and Hold
(for 2 seconds)
Output
Press