A&D GX-M Series Instruction Manual page 106

How to set flow calculation time by manual setting
The flow calculation time Ct can be set by the following procedure.
1. In weighing display, press and hold the
seconds) to display
2. Calculation time can be changed by following key operation.
The setting range is 1 second to 1 hour.
RE-ZERO (+) key ꞏꞏꞏꞏꞏ Change calculation time
MODE (-) key ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Change calculation time
PRINT key ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Store setting value
CAL key ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ
* Unit of time setting (second(s),minute(m) or hour(h)) is entered
in " * " of "g/*" and "mL/*".
For setting target values, refer to "GX-M/GF-M Series Flow
Measurement Function Supplementary Manual".
How to set flow calculation time by automatic setting
It is possible to perform flow measurement without going to the trouble of
selecting the flow rate calculation time Ct that matches the flow rate from
the setting value.
The flow calculation time Ct is decided according to the flow rate value
measured in 1 to 60 seconds. Accuracy can be selected from "Precision
Priority (Resolution 500)" ,"Standard Setting (Resolution 200)" and
"Response Priority (Resolution 50)".
The flow rate calculation precision can be changed by the following procedure.
1. Press and hold
during weighing display.
2. Press the RE-ZERO key to change the desired setting value.
Parameter
Factory setting
.
If the flow rate unit is g / *,
the display will return to weighing display.
When the flow rate unit is mL / *,
the display goes to density setting display.
It returns to weighing display
without storing the set value.
MODE key (for 2 seconds)
Description
Precision priority (Resolution 500)
Standard Setting (Resolution 200)
Response Priority (Resolution 50)
MODE key (for 2
or flow display
to display
106
Press and hold
(for 2 seconds)
In case of g/ setting
*
*
In case of mL/
Go to
" How to set the density"
f01
Press and hold
(for 2 seconds)
1
Fr RE5
0
Fr RE5
In case of g/* setting
Store the setting
f01
mL
1.23
/
5
In case of mL/* setting
Go to "How to set the density"
F01
d
setting
mL
1.23
/
5
200
500
1.0000