Password Lock Function - A&D GX-M Series Instruction Manual

21.Password Lock Function

By using the password lock function, it is possible to limit the usage and functions of the balance.
The function is effective for preventing alteration of date/time setting and preventing internal setting
changes by the user.
The password is set with four keys MODE , SAMPLE , PRINT and RE-ZERO keys in four digits (4
x 4 x 4 x 4 = 256 outcomes) .
At factory setting, the password function is disabled.
Enabling / disabling the password function and registering the password are performed in the Function table.
Three types of settings are possible depending on the " Lock " setting of the Function Table
"Password lock (PA55wd)".
No password lock function
Lock 0
Request password input at the start of weighing
Lock 1
To change the setting, login is required with the administrator's password.
Lock 2
Lock 0 ( No password lock function)
The password lock function is not used.
Anyone can perform weighing work. In addition, all functions can be used and setting changes are
also possible.
Lock 1 (Request password input at the start of weighing)
An administrator (ADMIN) can limit the users of the balance by setting individual passwords.
(The password input is required at the start of weighing with the
The balance cannot be in weighing state unless you enter the correct password.
There are two login levels: Administrator (ADMIN) and user (U5ER 01 to 10)
Administrator
(ADMIN)
User
(U5ER 01 to 10)
( To change the setting, login is required with the administrator's password.)
Lock 2
Anyone can perform weighing work, and initialization and setting changes can be restricted
(including clock).
(Password input is not requested when weighing starts with the ON/OFF
There are two levels of login level :Administrator (ADMIN) and user (GUE5t)
Administrator
All functions and settings can be used.
(ADMIN)
Guest
Initialization and changing setting is restricted.( including clock)
(GUE5t)
When weighing is started with the ON:OFF key while pressing the CAL key when the display is off,
the password of the administrator (ADMIN) is requested.
All functions and settings can be used.
Passwords for 10 users can be set individually.
Initialization and setting changes are restricted (including clock).
124
ON:OFF key.)
key.)