Weighing; Basic Operation - A&D GX-M Series Instruction Manual

6.Weighing

6-1 Basic Operation

1. Press MODE
In this case, select " ".
2. Place a container on the weighing pan, if necessary.
Press the RE-ZERO key to cancel the weight (tare).
The balance displays
depends on the balance model.)
3. Place a sample on the pan or in the container. Wait for the stabilization
indicator
Remove the sample and container from the pan.
Note
□ Press the SAMPLE key to turn on or off the minimum weighing value.
□ The weighing data can be stored in memory. For details, refer to "13.
Data Memory".
□ When the ON:OFF
on the weighing pan and weighing is started, the balance
automatically cancels the weight (tare) and displays
key, and then select the appropriates units
0. 0 0 g. (The decimal point position
to be displayed. Read the value.
key is pressed with a container placed
0. 0 0 g.
24
Weighing
pan
Container
Sample
Remove the
sample
(Display off)
Weighing
pan
Container