Table of Contents
Advertisement
Items that are limited by login level
Login level
Administrator
(
ADM IN
)
User
(
)
U5ER 01
10
to
Guest
(
)
GUE5t
5 Response adjustment, settings of the minimum weighing value, confirmation of the repeatability
*
using the internal weight, function switch and initialization and function table (date and time
setting)
6 The administrator (ADMIN) can set this to prohibited as shown in "10-1 Permit Or Inhibit ".
*
21-1 Enable Password Lock Function
By the password function (PA55wd ) of the Function table, the
password function can be switched between "Invalid(0ff) / Valid
(ALL) / Valid (Fnc)" .
1. In the weighing mode, press and hold the
(for 2 seconds) to display bA5fnc .
2. Press the SAMPLE key several times to display
3. Press the PRINT key to display
(To cancel, press the CAL key.)
4. Press the RE-ZERO key to display
(Press the RE-ZERO key again to display
5. Press the PRINT key to display
("No " blinking while "No" selected.)
6. Press the RE-ZERO key to switch yE5 / No.
7. Display
8. Press the PRINT key while YES is selected to enable the
password lock function.
(With Lock 1, password input is requested when the display is ON).
9. PA55No.
is displayed. To register (change) the password, proceed
to "4" on the "21-4.Registering Password (Changing)". If you will not
register, press the CAL key twice to return to the weighing display.
Password input at weighing start
Necessary
Unnecessary
. (yE5 blinking when selected YES.)
Weighing
Calibration
Possible
Impossible *6
SAMPLE
key
PA55 wd .
.
.
.
.
125
Change the function setting*5
Possible
Impossible
Press and hold
(for 2 seconds)
Press several times
Select No
Change Yes/No
Select Yes
x2
Advertisement
Table of Contents
