A&D GX-M Series Instruction Manual page 114

Description of error display
Over loaded
E
Under loaded
-E
* When any error described above is resolved, the balance returns to repeatability measurement.
When the balance is in unstable (approx. 20 seconds) during repeatability
Error 1
measurement
Time out (when no operation is made for approx. 2 minutes)
* After displaying Error, the repeatability measurement is forcibly finished and the balance returns to
function settings.
17. Repeatability (5D) or minimum displaying value (MW) can be output by selecting them.
Press the SAMPLE
weighing value (MW) and repeatability (5D).
Press the MODE key to switch allowable measurement error.
【 Minimum weighing value batch output example 】
GX-10202M
18. Press the PRINT key to output a display selected in Step 17 (repeatability (5D) or minimum
weighing value (MW)).
Press and hold the
key while
MW
0 1
%
_
MW 23.20
1
%
MW 2.32
Batch
Press and hold
output
(for 2 seconds)
Out
Output the minimum weighing
value data at once
End
PRINT key (for 2 seconds) to output data at once.
0 1
%
_
is displayed to toggle between minimum
23.20
5D 1 1.6
(repeatability)
Output
Output the currently selected display
(minimum weighing value/allowable
Go
measurement error)
114
Un it
Press
(release quickly after pressing)
Weighing mode
Press
Press and hold
(release quickly after pressing)
Store minimum weighing value
MiN
1.23
(for 2 seconds)
MW 5ET