A&D GX-M Series Instruction Manual page 81

Transmitting all memory data at one time
Confirm that the "Serial interface (5if)" parameters are set properly.
Refer to "10. Function Table" and "Communication Manual " on the A&D website.
1. Press and hold the PRINT key (for 2 seconds) until
displayed, then
2. Press the SAMPLE key to display out .
3. Press the PRINT key to display out
4. Press the RE-ZERO key to display out
5. Press the PRINT key to transmit all data using the RS-232C , USB.
6. The balance displays
Press the CAL key to return to the weighing mode.
Deleting all memory data at one time
1. Press and hold the PRINT key (for 2 seconds) until
displayed, then release the key.
2. Press the SAMPLE key several times to display
3. Press the PRINT key to display
4. Press the RE-ZERO key to display
5. Press the PRINT key to delete all data
6. The balance displays
release the key.
when all data is transmitted.
end and returns to the weighing mode.
is
with " " blinking.
with " " blinking.
.
with " " blinking.
with blinking.
81
012
-d-
RECALL
-d-
out
-d-
out
-d-
out
Output
-d-
CLEAR
is
-d-
RECALL
-d-
CLEAR
-d-
CLEAR
-d-
CLEAR
Delete
at once
Press and hold
(for 2 seconds)
No
Go
Press and hold
(for 2 seconds)
Press
several times
No
Go