Outputting The Function Setting Information - A&D GX-M Series Instruction Manual

Description of the flow measurement mode
It is a function to calculate the flow measurement .
Refer to "15.Flow Measurement " .
Description of the gross net tare mode
This is a function to operate the zero setting and taring separately and to output the data of Gross
(total amount), Net (net amount) and Tare (tare quantity).
Refer to "16.Gross Net Tare Function".

11-12 Outputting the function setting information

Function setting can set the balance to appropriate operations for your needs.
The function table menu consists of two layers. The first layer is the "Class" and the second layer is
the "Item".
By performing the following procedure, the function setting status can be output at once, so settings
of balance being used can be recorded.
Outputting the function setting information at once
1. Press and hold the
weighing mode
2. bA5Fnc is displayed.
3. Press and hold the
display -L i5t- . A current function setting information is
output at once.
SAMPLE key (for 2 seconds) in
PRINT key (for 2 seconds) to
apf 3
( ).
apf 4
( ).
Output
69
0.00
Press and hold
(for 2 seconds)
bA5Fnc
Press and hold
(for 2 seconds)
-L i5T-
End
bA5fnc