Flow Measurement; How To Use Flow Measurement - A&D GX-M Series Instruction Manual

15.Flow Measurement

The balance has a "flow mode" that calculates the amount of change in the weighing value per hour.
For details, please refer to "Supplementary information" which can be downloaded from the A&D website
http://www.aandd.jp) .
□ If the flow unit is set to mL/*, density can be registered. The maximum number of registrations is
10, and if density is set in advance, it can be selected according to the measurement sample.
□ The flow rate value is calculated by the following formula.


W W

Q
Ct
For flow rate calculation time Ct, select manual / automatic and set.

15-1 How To Use Flow Measurement

Enable flow rate measurement
Switch flow rate measurement (Change the Function Table)
1. Press and hold the
1ba5fnc of the function table is displayed, then release
the key.
2. Press the SAMPLE key several times to display
3. Press the PRINT key to display
4. Press the RE-ZERO key several times to display
If you want to change the flow rate unit, go to "5".
If you want store the setting, go to "7".
If you want to cancel the flow function, press the RE-ZERO
key and return to
Q : Flow rate
W : Current calculated value
Weight
W
W'
SAMPLE key (for 2 seconds) until
.
Ct : Calculation time
Weighing value
W - W'
Ct
ap fnc .
.
Store the setting
go to "7"
104
W' : Weight value befer Ct
Time
Press and hold
(for 2 seconds)
Press several times
.
Press several times
Set the flow rate unit
go to "5"