Recalling the unit mass
1. Follow steps1 through 3 in "Storing the unit mass" on the previous page, to enter the sample unit
mass confirmation mode.
2. Select the unit mass number using the following keys.
RE-ZERO key
MODE key
3. Press the PRINT key to confirm the selection and to return
to the weighing mode.
To cancel the selection and return to the weighing mode, press
the
CAL key
To increase the unit mass number by
one.
To decrease the unit mass by one.
.
87
+1
No4. of unit
mass
Confirm
-1
Counting mode