Clock And Calendar Function - A&D BM series Instruction Manual

Clock and Calendar Function

10.7.
The balance is equipped with a clock and calendar function. When
"GLP output (
info
and date can be added to the output data. The operation is as follows:
Operation
1 In the weighing mode, press and hold the
2 seconds) until
ba5fnc
2 Press the
RANGE
3 Press the
PRINT
Checking the current time
4 The current time is displayed with all the digits blinking.
To change the time, press the
When the time is correct, press the
To exit the mode, press the
Storing a new time
5 Set the time in a 24-hour format using the following keys.
(+)key ... To increase the value by one.
RE-ZERO
(-)key ....... To decrease the value by one.
MODE
key ........ To select the digit to change the value.
RANGE
key ......... To store the new time, and proceed to Step 6.
PRINT
key ............. To cancel the operation and proceed to Step 6.
CAL
Checking the current date
6 The current date is displayed with all the digits blinking.
To change the display order of year (y), month (m) and day (d),
press the
MODE
To change the date, press the
When the date is correct, press the
To change the time again, press the
back to Step 4.
Storing a new date
7 Set the date using the following keys.
(+)key ... To increase the value by one.
RE-ZERO
(-)key ........ To decrease the value by one.
MODE
key ........ To select the digits to change the value.
RANGE
key .......... To store the new setting, and proceed to Step 8.
PRINT
key ............. To cancel the new setting and proceed to Step 8.
CAL
Quitting the operation
8 The balance displays the next menu item of the function table.
Press the
CAL
Note Do not enter invalid values such as non-existing time and date in this function.
When the clock backup battery has been depleted, the balance displays
Under this condition, press any key and set the time and date. The dead battery
only affects the clock and calendar function. Even so, the function works normally
as long as the AC adapter is connected to the balance.
BM series
)" and "Time/Date output (
is displayed, and then release the key.
key several times to display
key to enter the time and date setting mode.
RE-ZERO
RANGE
key and proceed to Step 8.
CAL
key. The date is output in the order as specified.
RE-ZERO
CAL
key to exit the mode and return to the weighing mode.
)" are used, the time
5-td
key (for approx.
RANGE
.
Cl adj
key and proceed to Step 5.
key and proceed to Step 6.
key and proceed to Step 7.
key and proceed to Step 8.
key and proceed
RANGE
57
Press and hold
(approx. 2 seconds)
Press several times
The current
time
New time
Store new time
The current
date
New date
Store new date
rtc pf
.