A&D GX-M Series Instruction Manual page 23

Unit setting example
The example below sets the units in the order with g (gram) as the first unit followed by pcs
(counting mode).
1. Press and hold the
ba5fnc of the function table is displayed, then
release the key.
2. Press the SAMPLE
1Unit .
3. Press the PRINT
mode.
4. Press the RE-ZERO key to specify the unit of g
The stabilization indicator
unit is specified.
5. Press the SAMPLE key to display 1Unit pC5 .
6. Press the RE-ZERO key to specify the unit of pcs.
The stabilization indicator
unit is specified.
7. Press the PRINT key to store the units.
The balance displays
menu item of the function table.
8. Press the CAL
the balance returns to the weighing mode with g, the
unit selected first.
9. Press the MODE key to switch between g and pcs
(gpcs).
SAMPLE key (for 2 seconds) until
key several times to display
key to enter the unit selection
appears when the
appears when the
end and then displays the next
key to exit the function table. Then
23
Press and hold
(for 2 seconds)
Press
several times
Specify
Select
Specify
Store