BRP EVINRUDE E-TEC 115 HP 2011 Service Manual page 316

GEARCASE – COUNTER ROTATION
SHIFTER, BEARING AND SEAL SERVICING
Remove the thrust bearing.
Remove the bearing housing from the forward
gear.
Remove the thrust bearing from the forward gear.
Inspect the forward gear for excessive wear or
damage.
314
Remove the forward gear bearing only if it needs
to be replaced. If removal of the bearing is neces-
sary, use Large Puller Jaws, P/N 432129, and
Puller Bridge, P/N 432127, with an appropriate
base. Leave the rollers in to allow for good contact
with the puller jaws.
31963
Push propeller shaft out of the bearing housing.
31961
Remove the thrust washer and thrust bearing.
1
31960
1. Thrust washer
2. Thrust bearing
31958
13479
2
13593