BRP EVINRUDE E-TEC 115 HP 2011 Service Manual page 120

ELECTRICAL AND IGNITION
ELECTRIC STARTER SERVICING
Remove pinion and plastic weather cover from
pinion shaft.
Remove the driven gear and thrust washer.
Using No. 2 external retaining ring pliers, remove
the retaining ring and drive gear from the armature
shaft.
118
Remove the two thru-bolts. Mark the end cap ori-
entation, and remove the cap.
30368
Gently tap the starter frame with a rubber mallet to
loosen it.
Find the insulator cap (end of the shaft or inside
the end cap). Inspect and replace, if necessary.
30367
30366
30365
30354B