Shift Housing, Gear And Propeller Shaft Removal; Water Intake Screens - BRP EVINRUDE E-TEC 115 HP 2011 Service Manual

Install the roll pin to the specified dimension.
1
1. Roll pin
Shift Housing, Gear and
Propeller Shaft Removal
Push down on the shift rod. This will move the
detent lever downward to clear the inside of the
gearcase when the shaft assembly is pulled out.
Unscrew the shift rod from the detent lever.
Remove screws, cover, and shift rod from the
gearcase.
Discard the cover gasket. Remove and discard
the shift rod O-ring from inside of cover.
1
1. Cover gasket
GEARCASE – STANDARD ROTATION
Remove propeller shaft assembly from gearcase.
0.125 in.
(3.2 mm)
DR4610

Water Intake Screens

Remove and clean water intake screens. Replace
if damaged.
1. Water intake screen
006884
GEARCASE DISASSEMBLY
006839
1
006886
12
283