BRP EVINRUDE E-TEC 115 HP 2011 Service Manual page 205

Table of Contents

Remove the lower main bearing only if it needs to

be replaced. Use external retaining ring pliers to

remove the lower bearing retaining ring.

If the lower main bearing is

removed from the crankshaft, it must be dis-

carded. DO NOT reuse it.

Use a bearing separator to support the bearing,

and press off the crankshaft.

Remove and inspect crankcase seal rings. Iden-

tify each ring for installation in original location.

Remove center main bearings and split sleeves

for inspection. Do not mix parts. Note location of

bearings for reassembly.

POWERHEAD DISASSEMBLY

Chapters

Table of Contents