BRP EVINRUDE E-TEC 115 HP 2011 Service Manual page 158

FUEL SYSTEM
FUEL COMPONENT SERVICING
Install oil filter and oil and fuel supply hoses.
1
1. Tie strap
Install crankshaft position sensor.
Install vapor separator vent hose and oil recircula-
tion hose. Secure with tie straps.
Connect throttle linkage and throttle position sen-
sor connector.
156
Secure connector to reed plate bracket with tie
strap.
IMPORTANT:
ages.
1
2
005343
1. Vapor separator vent hose
2. Throttle linkage
3. TPS electrical connector
4. Tie strap
Refer to TPS Calibration on p. 116.
DO NOT lubricate throttle link-
3
4
005361