BRP EVINRUDE E-TEC 115 HP 2011 Service Manual page 289

Push the pin out of the clutch dog. Remove all
parts.
1. Pin
Remove the gear, thrust bearing, and thrust
washer from the shift housing.
2
1. Gear
2. Thrust bearing
3. Thrust washer
Remove the shift lever pin from the housing.
Remove shift shaft, cradle and shift lever. Move
GEARCASE – STANDARD ROTATION
SHIFTER, BEARING AND SEAL SERVICE
shifter detent as needed to help ease removal of
parts.
5
1
1
COA3561 1. Shift lever pin
2. Shift shaft
3. Cradle
4. Shift lever
5. Shifter detent
WARNING
1
Wear safety glasses to avoid personal
injury. The detent ball and spring and
come out with great force.
3
Wrap the housing with a shop cloth to catch ball
and spring. Rotate the shifter detent 90° in either
direction, then pull the detent out of the housing.
COA3562
1
1. Shifter detent
2. Ball and spring
Remove the detent ball and spring.
Remove needle bearings from bearing housing for
cleaning and inspection (except "S2" Type).
4
3
2
006890
2
DSC02518
12
287