BRP EVINRUDE E-TEC 115 HP 2011 Service Manual page 252

Table of Contents

STERN BRACKET

Remove the tilt limit switch and retainer from the

swivel bracket.

1. Tilt limit switch

Disconnect the trail lock spring and remove it from

the swivel bracket. Remove trail arm retainer.

1. Trail lock spring

2. Trail arm retainer

Remove the trail lock arm and bushings from the

swivel bracket.

1. Trail lock bushing

Remove the two trim rod rollers from the swivel

1. Trim rod roller

Remove the tilt support and bushing from the

swivel bracket and inspect the detent roller and

1. Tilt support bushing

Chapters

Table of Contents