Cisco BTS 10200 Softswitch Manual page 92

Automatic Number Identification/Dialed Number Identification Service Manipulation
TGN5_ID
TGN6_ID
TGN7_ID
TGN8_ID
TGN9_ID
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-76
Description: Foreign key: Trunk Group table. The fifth trunk group within
the route. This field can also be provisioned using tg instead of tgn-id. The
EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Description: Foreign key: Trunk Group table. The sixth trunk group within
the route. This field can also be provisioned using tg instead of tgn-id. The
EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Description: Foreign key: Trunk Group table. The seventh trunk group
within the route. This field can also be provisioned using tg instead of tgn-id.
The EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Description: Foreign key: Trunk Group table. The eighth trunk group within
the route. This field can also be provisioned using tg instead of tgn-id. The
EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Description: Foreign key: Trunk Group table. The ninth trunk group within
the route. This field can also be provisioned using tg instead of tgn-id. The
EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Chapter 1 Digit Translations
OL-8001-10