Cisco BTS 10200 Softswitch Manual page 190

Policy Based Flexible Routing
END_RANGE2
END_RANGE3
END_RANGE4
END_RANGE5
ID
LIMIT
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
2-74
Description: Defines the end of the percent range (beginning and ending
percents) for the second destination.
SMALLINT: 1-100.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_100]
Parser: DecimalParser
Description: Defines the end of the percent range (beginning and ending
percents) for the third destination.
SMALLINT: 1-100.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_100]
Parser: DecimalParser
Description: Defines the end of the percent range (beginning and ending
percents) for the fourth destination.
SMALLINT: 1-100.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_100]
Parser: DecimalParser
Description: Defines the end of the percent range (beginning and ending
percents) for the fifth destination.
SMALLINT: 1-100.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_100]
Parser: DecimalParser
Description: Primary key. Unique identifier for this policy-tod. Assigned by
service provider.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, show, delete, audit, sync
Mandatory: add, change, delete
Possible Value: [1_16]
Parser: TextParser
Description: Specifies the number of rows to display on the screen. Valid
only for the show command.
INTEGER: 1-100000000 (Default = 100000000).
Valid for Command: show
Default Value: 100000000
Possible Value: [1_100000000]
Parser: DecimalParser
Chapter 2 Routing
OL-8001-10