Cisco BTS 10200 Softswitch Manual page 114

Automatic Number Identification/Dialed Number Identification Service Manipulation
DISPLAY
LIMIT
LNP_QUERY
MASTER
ORDER
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-98
Description: Specifies what token information to display on the screen. Valid
only for the show command.
VARCHAR(1024): 1-1024 (Default = all tokens are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Description: Specifies the number of rows to display on the screen. Valid
only for the show command.
INTEGER: 1-100000000 (Default = 100000000).
Valid for Command: show
Default Value: 100000000
Possible Value: [1_100000000]
Parser: DecimalParser
Description: Specifies whether to perform an LNP query on the call type.
Applies only if the all-call-query token in the LNP Profile table is set to Y
and the acq-lnp-query token in the Destination table is set to
acq-based-on-call-type.
CHAR(1): Y/N (Default = Y)
Y—Perform an LNP query.
N—Do not perform an LNP query.
Valid for Command: add, change, show, audit, sync
Default Value: Y
Possible Value: Y, N
Parser: BooleanParser
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Description: Specifies whether to display data on the screen in a sorted order.
Valid only for the show command.
VARCHAR(1024): 1-1024 (Default = all rows are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Chapter 1 Digit Translations
OL-8001-10