Cisco BTS 10200 Softswitch Manual page 170

Policy Based Flexible Routing
START_TIME10
START_TIME2
START_TIME3
START_TIME4
START_TIME5
START_TIME6
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
2-54
Description: The time in hours and minutes (24-hour clock) that this policy
starts (time of day provisioning).
CHAR(5): HH:MM.
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
starts (time of day provisioning).
CHAR(5): HH:MM.
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
starts (time of day provisioning).
CHAR(5): HH:MM.
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
starts (time of day provisioning).
CHAR(5): HH:MM.
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
starts (time of day provisioning).
CHAR(5): HH:MM.
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
starts (time of day provisioning).
CHAR(5): HH:MM.
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Chapter 2 Routing
OL-8001-10