Cisco BTS 10200 Softswitch Manual page 173

Chapter 2 Routing
STOP_TIME1
STOP_TIME10
STOP_TIME2
STOP_TIME3
STOP_TIME4
STOP_TIME5
OL-8001-10
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Policy Based Flexible Routing
2-57