Cisco BTS 10200 Softswitch Manual page 73

Cisco systems softswitch dial plan guide
Hide thumbs Also See for BTS 10200 Softswitch:
Table of Contents

Advertisement

Chapter 1
Digit Translations
CALL_SUBTYPE
CALL_TYPE
CARRIER_ID
CHARGE_BAND_
UNIT
CHARGE_TYPE
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: Foreign key: Call Type table. Specifies the subcategory of a call
type for dialed digits: call-type plus call-subtype. Only one
call-type/call-subtype pair is permitted per destination.
VARCHAR(16): 1-16 ASCII characters. Permitted values are:
NONE (Default)—No associated subtype, not applicable.
If call-type=test-call the following values are permitted:
Valid for Command: add, change, audit, sync, show
Mandatory: add
Default Value: NONE
Possible Value: [1_16]
Parser: TextNoNullCaseParser
Description: Foreign key: Call Subtype table. Type of dialed call.
VARCHAR(16): 1-16 ASCII characters (Default = VACANT).
Valid for Command: add, change, audit, sync, show
Default Value: VACANT
Possible Value: TEST_CALL, INTL, LOCAL, TOLL, INTERLATA,
TANDEM, EMG, NON_EMG, DA, DA_TOLL, REPAIR, RELAY,
BUSINESS, TOLL_FREE, 900, 500, 700, 976, VACANT, NATIONAL, TW,
INFO, PREMIUM, PCS, NAS, POLICE, FIRE, AMBULANCE, TIME,
WEATHER, TRAFFIC, LB_TEST, OPERATOR, CUT_THRU, INTL_OPR,
NAT_OPR, AIRLINES, RAILWAYS, SVC_CODE, INTL_WZ1, LRN,
UAN
Parser: TextNoCaseParser
Description: Mandatory only if route-type=carrier. Foreign key: Carrier
table. The call is routed to the specified carrier. Used for 900, 500 type calls.
Also used to route 800 calls to Access Tandem Server if the Call Agent does
not support 800 Service Control Point (SCP) queries.
CHAR(4): 4 numeric characters: 0000-9999.
Valid for Command: add, change, audit, sync, show
Possible Value: [4_4]
Parser: DigitParser
Valid for Command: add, audit, sync, change, show
Mandatory: add
Default Value: 00
Possible Value: [2_2]
Parser: HexParser
Valid for Command: add, change, audit, sync, show
Mandatory: add
Default Value: NONE
Possible Value: NONE, CHARGE_BAND, CHARGE_UNIT
Parser: TextNoCaseParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-57

Advertisement

Table of Contents
loading

Table of Contents