Cisco BTS 10200 Softswitch Manual page 65

Chapter 1 Digit Translations
PLATFORM_STATE
SPLIT_NPA
START_ROW
TARGET
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: State of an active or standby system shared memory database;
use to audit an active or standby system shared memory database. Valid for
the audit database and audit table name commands.
VARCHAR(7): 1-7 ASCII characters. Permitted values are:
ACTIVE (Default)—System is active (currently running).
STANDBY—System is in standby mode.
EMS—Audits the active EMS to the standby EMS.
Valid for Command: sync, audit
Default Value: ACTIVE
Possible Value: ACTIVE, STANDBY
Parser: TextParser
Description: Automatically provisioned when a record is added to the
split-NPA table. Applies only to NANP.
VARCHAR(7): 1-7 ASCII characters. Permitted values are:
OLD-NPA—Dialed number is associated with the old NPA.
NEW-NPA—Dialed number is associated with the new NPA.
NONE (Default)—Not associated with split NPA.
Valid for Command: add, audit, change, show, sync
Mandatory: add
Default Value: NONE
Possible Value: NEW_NPA, NONE, OLD_NPA
Parser: TextParser
Description: Specifies to begin displaying data on the screen at a specific
row. Valid only for the show command.
INTEGER: 1-100000000 (Default = 1).
Valid for Command: show
Default Value: 1
Possible Value: [1_100000000]
Parser: DecimalParser
Description: Specifies the network element to receive the request.
VARCHAR(5): 1-5 ASCII characters. Permitted values are:
CA—Network identifier of a Call Agent.
FSPTC (POTS/Tandem/Centrex Feature Server)—Network identifier of a
specific Feature Server.
FSAIN (AIN Feature Server)—Network identifier of AIN Feature Servers.
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-49