Cisco BTS 10200 Softswitch Manual page 103

Chapter 1 Digit Translations
POP_ID
QOS_ID
REGION
REMOTE_SWITCH_
LRN
SCRIPT_SUPP
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: Foreign key: POP table. Defines the number of POPs in a Call
Agent; used for incoming trunk groups.
VARCHAR(16): 1-16 ASCII characters.
SValid for Command: add, change, audit, sync, show
Mandatory (new): add
Possible Value: [1_16]
Parser: TextParser
Description: Foreign key: QOS table. Specifies whether or not to use QOS
index for codec selection.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_16]
Parser: TextParser
Description: Region of the incoming trunk group.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_16]
Parser: TextParser
Description: LRN of the previous switch used for billing.
VARCHAR(10): 1-10 numeric digits, in the format NPA-NXX-XXXX.
(Default = 0).
Valid for Command: add, change, audit, sync, show
Possible Value: [3_10]
Parser: NPAParser
Description: Specifies whether the script package is supported by the trunk
group. Used for prepaid service.
CHAR(1): Y/N (Default = N).
Valid for Command: add, change, audit, sync, show
Default Value: N
Possible Value: Y, N
Parser: BooleanParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-87