Cisco BTS 10200 Softswitch Manual page 293

Chapter 6 Provisioning Dial Plans
ORDER
PLATFORM_STATE
START_ROW
TARGET
OL-8001-10
Description: Specifies whether to display data on the screen in a sorted
order. Valid only for the show command.
VARCHAR(51200): 1-51200 (Default = all rows are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Description: State of an active or standby system shared memory database;
use to audit an active or standby system shared memory database. Valid for
the audit database and audit table name commands.
VARCHAR(7): 1-7 ASCII characters. Permitted values are:
ACTIVE (Default)--System is active (currently running).
STANDBY--System is in standby mode.
EMS--Audits the active EMS to the standby EMS.
Valid for Command: sync, audit
Default Value: ACTIVE
Possible Value: ACTIVE, STANDBY
Parser: TextParser
Description: Specifies to begin displaying data on the screen at a specific
row. Valid only for the show command.
INTEGER: 1-100000000 (Default = 1).
Valid for Command: show
Default Value: 1
Possible Value: [1_100000000]
Parser: DecimalParser
Description: Specifies the network element to receive the request.
VARCHAR(5): 1-5 ASCII characters. Permitted values are:
CA--Network identifier of a Call Agent.
FSPTC (POTS/Tandem/Centrex Feature Server)--Network identifier of a
specific Feature Server.
FSAIN (AIN Feature Server)--Network identifier of AIN Feature Servers.
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Provisioning a Dial Plan with the Command Line Interface
6-5