Cisco BTS 10200 Softswitch Manual page 113

Chapter 1 Digit Translations
Command Types add, audit, change, delete, help, show, sync
Sync is a restricted command and is intended for repairing data only. Improper use may corrupt database
Caution
and disrupt call processing. Use with caution.
Examples
show call-type-profile;
add call-type-profile call-type=mobile; lnp-query=y;
change call-type-profile call-type=mobile; lnp-query=n;
delete call-type-profile call-type=mobile;
Usage Guidelines Primary Key Token(s): CALL_TYPE
LATA stands for local access transport area. It is predefined by geographical area.
Note
Syntax Description AUTO_REFRESH
CALL_TYPE
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: Specifies whether to display cached data on the screen. Valid
only for the show command.
CHAR(1): Y/N (Default = Y).
Y—Queries the database for the most current data.
N—Queries the database for the most current data only if the cached data is
unavailable.
Valid for Command: show
Default Value: Y
Possible Value: Y, N
Parser: BooleanParser
Description: Primary key. Foreign key: Call Type table. The call type. Valid
call types are defined in the Call Type table.
VARCHAR(16): 1-16 ASCII characters. See
Appendix G, "Call Types and Subtypes"
for a list of valid call types.
Valid for Command: add, change, delete, show, audit, sync
Mandatory: add, change, delete
Possible Value: [1_16]
Parser: TextNoCaseParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-97