Cisco BTS 10200 Softswitch Manual page 104

Automatic Number Identification/Dialed Number Identification Service Manipulation
SEL_POLICY
SEND_EARLY_
BKWD_MSG
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-88
Description: Trunk selection policy. Control the Call Agent out-of-service,
then in-service, after changing the selection policy. Then verify that the
selection policy is changed.
VARCHAR(4): 1-4 ASCII characters (Default = ASC). Permitted values are:
ASC—Select trunks in ascending order. When trunks are released, they are
released at the top of the queue. When a new trunk is selected, the lower
number trunk (CIC) is selected.
CASC—Cyclic ascending. Select trunks in ascending order. When trunks are
released, they are released at the end of the list, so when a new trunk is
selected, the next higher trunk (CIC) is selected.
CDSC—Cyclic descending. Select trunks in descending order. When trunks
are released, they are released at the end of the list, so when a new trunk is
selected, the next lower trunk (CIC) is selected.
DSC—Select trunks in descending order. When trunks are released, they are
released at the top of the queue. When a new trunk is selected, the higher
number trunk (CIC) is selected.
EVEN—Select the least recently used even-numbered trunks.
LRU—Select the least recently used trunk.
MRU—Not used. Select the most recently used trunk.
ODD—Select the least recently used odd-numbered trunks.
RAND—Not used. Select a trunk randomly.
Valid for Command: add, change, audit, sync, show
Default Value: ASC
Possible Value: ODD, DSC, LRU, ASC, EVEN, MRU, CASC, CDSC
Parser: TextParser
Description: Specifies whether to start the Early Backward Message timer.
CHAR(1): Y/N (Default = N).
Y—Start early backward message timer. An early message is sent when it
expires.
N—Do not start early backward message timer.
Valid for Command: add, change, audit, sync, show
Mandatory: add
Default Value: N
Possible Value: Y, N
Parser: BooleanParser
Chapter 1 Digit Translations
OL-8001-10