Cisco BTS 10200 Softswitch Manual page 107

Chapter 1 Digit Translations
TARGET_STATE
TG
TG_PROFILE_ID
TG_TYPE
THROTTLE
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: The state (active or standby) of the Call Agent or Feature
Server.
VARCHAR(7): 1-7 ASCII characters. Permitted values are:
ACTIVE (Default)—Call Agent or Feature Server is in active state.
STANDBY—Call Agent or Feature Server is in standby state.
Valid for Command: control, show
Mandatory: control
Possible Value: INS, MAINT, OOS
Parser: TextParser
Description: Unique key. ASCII name for the trunk group.
VARCHAR(20): 1-20 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_20]
Parser: TextParser
Description: Mandatory if tg-type=annc. The trunk group profile ID.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, audit, sync, show
Mandatory: add
Possible Value: [1_16]
Parser: TextParser
Description: Trunk group type.
VARCHAR(6): 1-6 ASCII characters. Permitted values are:
ANNC—Announcement.
SOFTSW—Softswitch trunk group.
CAS—Channel associated signaling.
ISDN—Integrated Services Digital Network.
SS7—Signaling System 7.
H323—H.323 trunk group.
Valid for Command: add, audit, sync, show
Mandatory: add
Possible Value: ANNC, SOFTSW, CAS, ISDN, SS7, H323
Parser: TextParser
Valid for Command: status
Mandatory: status
Default Value: N
Possible Value: Y, N
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-91