Cisco BTS 10200 Softswitch Manual page 51

Cisco systems softswitch dial plan guide
Hide thumbs Also See for BTS 10200 Softswitch:
Table of Contents

Advertisement

Chapter 1
Digit Translations
Automatic Number Identification/Dialed Number Identification Service Manipulation
REPLACE_NOA
Description: If a match on NOA is found, the input NOA is replaced with the NOA specified in this token.
VARCHAR(32): 1-32 ASCII characters.
Permitted values are:
950—950 Call
ABBR—Abbreviated number
CUT-THRU—No number present, cut-thru call
INTL—International number
INTL-OPR—International Number, Operator Requested (Valid for Called Party Number only)
INTL—Unique International Number
NATIONAL—Unique National Number
NAT-OPR—National Number, Operator Requested (Valid for Called Party Number only)
NETWORK—Network
NON-UNIQUE-INTL—Non-unique international number (valid for Calling Party number).
NON-UNIQUE-NATIONAL—Non-unique national number (valid for Calling Party number).
NON-UNIQUE-SUBSCRIBER—Non-unique subscriber number (valid for Calling Party number).
NS0—Network specific (111 1000)
NS0—Network specific (111 1000)
NS1—Network specific (111 1001)
NS1—Network specific (111 1001)
NS2—Network specific (111 1010)
NS2—Network specific (111 1010)
NS3—Network specific (111 1011)
NS3—Network specific (111 1011)
NS4—Network specific (111 1100)
NS4—Network specific (111 1100)
NS5—Network specific (111 1101)
NS5—Network specific (111 1101)
NS6—Network specific (111 1110)
NS6—Network specific (111 1110)
OPERATOR—No Number, Operator Call (Valid for Called Party Number only)
PORTED-NUMBER-WITHOUT-RN—The Ported Number maybe prefixed with the network id, or may not
be prefixed with anything (DN or NTWK-ID+DN), but does not include the Switch ID.
PORTED-NUMBER-WITH-RN—The Ported Number is prefixed with the network id and switch id
(RN+DN).
PRIVATE—Private Numbering Plan
RESERVED—Reserved NOA
SPARE0/SPARE2—Spare. Not Used.
SUB-OPR—Subscriber Number, Operator Requested (Valid for Called Party Number only)
SUBSCRIBER—Unique Subscriber Number
TEST-LINE—Test Line
UNKNOWN—Nature of Address is Unknown.
VSC—Vertical Service Code
Valid for Command: add, audit, change, show
Possible Value: 950, ABBR, CUT_THRU, INTL, INTL_OPR, NATIONAL, NS0, NS1, NS2, NS3, NS4, NS5,
NS6, OPERATOR, PRIVATE, RESERVED, SPARE0, SPARE2, SUBSCRIBER, TEST_LINE, UNKNOWN,
VSC, NAT_OPR, NON_UNIQUE_INTL, NON_UNIQUE_NATIONAL, NON_UNIQUE_SUBSCRIBER,
SUB_OPR, PORTED_NUMBER_WITH_RN, PORTED_NUMBER_WITHOUT_RN
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-35
OL-8001-10

Advertisement

Table of Contents
loading

Table of Contents