Cisco BTS 10200 Softswitch Manual page 39

Chapter 1 Digit Translations
LIMIT
MASTER
NOA
ORDER
OL-8001-10
Description: Specifies the number of rows to display on the screen. Valid
only for the show command.
INTEGER: 1-100000000 (Default = 100000000).
Valid for Command: show
Default Value: 100000000
Possible Value: [1_100000000]
Parser: DecimalParser
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Description: Primary key. The Nature of Address.
VARCHAR(32): 1-32 ASCII characters. Permitted values are:
PORTED-NUMBER-WITH-RN—The ported number is prefixed with
Network ID and Switch ID (RN+DN).
PORTED-NUMBER-WITHOUT-RN—The ported number may be prefixed
with a Network ID, or may not be prefixed with anything (DN or NTWK-ID
plus the DN), but does not include the switch id.
Valid for Command: add, change, delete, show, audit, sync
Mandatory: add, change, delete
Possible Value: PORTED_NUMBER_WITH_RN,
PORTED_NUMBER_WITHOUT_RN
Parser: TextNoCaseParser
Description: Specifies whether to display data on the screen in a sorted order.
Valid only for the show command.
VARCHAR(1024): 1-1024 (Default = all rows are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Nature of Address Manipulation
1-23