Cisco BTS 10200 Softswitch Manual page 52

Automatic Number Identification/Dialed Number Identification Service Manipulation
REPLACE_STRING
RULE
START_ROW
TARGET
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-36
Description: If a match is found, the matched string is replaced with the
replace-string.
VARCHAR(40): 1-40 ASCII characters. The characters can be one of the
following:
Digits (A-F, 0-9, *, #)
Ampersand (&)
NONE (the actual word)
Valid for Command: add, audit, change, show
Possible Value: [1_40]
Parser: ReplaceStringParser
Description:
Valid for Command: add, audit, change, delete, show
Mandatory: add, change, delete
Possible Value: [1_20]
Parser: DecimalParser
Description: Specifies to begin displaying data on the screen at a specific
row. Valid only for the show command.
INTEGER: 1-100000000 (Default = 1).
Valid for Command: show
Default Value: 1
Possible Value: [1_100000000]
Parser: DecimalParser
Description: Specifies the network element to receive the request.
VARCHAR(5): 1-5 ASCII characters. Permitted values are:
CA—Network identifier of a Call Agent.
FSPTC (POTS/Tandem/Centrex Feature Server)—Network identifier of a
specific Feature Server.
FSAIN (AIN Feature Server)—Network identifier of AIN Feature Servers.
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Chapter 1 Digit Translations
OL-8001-10