Cisco BTS 10200 Softswitch Manual page 169

Chapter 2 Routing
START_DOW4
START_DOW5
START_DOW6
START_DOW7
START_DOW8
START_DOW9
START_ROW
START_TIME1
OL-8001-10
Description: See START-DOW1.
Valid for Command: add, change, audit, sync, show
Possible Value: SUN, MON, TUE, WED, THU, FRI, SAT
Parser: TextParser
Description: See START-DOW1.
Valid for Command: add, change, audit, sync, show
Possible Value: SUN, MON, TUE, WED, THU, FRI, SAT
Parser: TextParser
Description: See START-DOW1.
Valid for Command: add, change, audit, sync, show
Possible Value: SUN, MON, TUE, WED, THU, FRI, SAT
Parser: TextParser
Description: See START-DOW1.
Valid for Command: add, change, audit, sync, show
Possible Value: SUN, MON, TUE, WED, THU, FRI, SAT
Parser: TextParser
Description: See START-DOW1.
Valid for Command: add, change, audit, sync, show
Possible Value: SUN, MON, TUE, WED, THU, FRI, SAT
Parser: TextParser
Description: See START-DOW1.
Valid for Command: add, change, audit, sync, show
Possible Value: SUN, MON, TUE, WED, THU, FRI, SAT
Parser: TextParser
Description: Specifies to begin displaying data on the screen at a specific
row. Valid only for the show command.
INTEGER: 1-100000000 (Default = 1).
Valid for Command: show
Default Value: 1
Possible Value: [1_100000000]
Parser: DecimalParser
Description: The time in hours and minutes (24-hour clock) that this policy
starts (time of day provisioning).
CHAR(5): HH:MM.
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Policy Based Flexible Routing
2-53