Cisco BTS 10200 Softswitch Manual page 213

Chapter 2 Routing
Examples
show policy-region id=ca200; region=sanantonio;
add policy-region id=ca200; region=sanantonio; policy-type=tod; policy-id=tod101;
change policy-region id=ca200; region=sanantonio; policy-type=tod; policy-id=tod102;
delete policy-region id=ca200; region=sanantonio;
Usage Guidelines Primary Key Token(s): ID, REGION
Foreign Key Token(s): policy-type n plus policy-id n
Add Rules: region-profile id must exist; policy-id exists in policy-<policy-type>::id if entered.
Change Rules: id must exist; policy-id exists in policy-<policy-type>::id if entered.
Delete Rules: id does not exist in any <route-guide, policy-odr, policy-percent, policy-tod, policy-prefix,
policy-oli, or policy-pop>::policy-id where policy-type = region.
Upgrade Impact:
•
•
•
Syntax Description AUTO_REFRESH
DISPLAY
OL-8001-10
Set TYPE to REGION.
For each entry in POLICY_REGION, add an entry into POLICY_PROFILE table.
For each POLICY_ID, add an entry into POLICY_PROFILE table.
Description: Specifies whether to display cached data on the screen. Valid
only for the show command.
CHAR(1): Y/N (Default = Y).
Y—Queries the database for the most current data.
N—Queries the database for the most current data only if the cached data is
unavailable.
Valid for Command: show
Default Value: Y
Possible Value: Y, N
Parser: BooleanParser
Description: Specifies what token information to display on the screen. Valid
only for the show command.
VARCHAR(1024): 1-1024 (Default = all tokens are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Policy Based Flexible Routing
2-97