Cisco BTS 10200 Softswitch Manual page 59

Chapter 1 Digit Translations
DISPLAY
ID
LIMIT
MASTER
ORDER
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: Specifies what token information to display on the screen. Valid
only for the show command.
VARCHAR(1024): 1-1024 (Default = all tokens are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Description: Primary key. The NOA Route Profile id.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, delete, show, audit, sync
Mandatory: add, change, delete
Possible Value: [1_16]
Parser: TextParser
Description: Specifies the number of rows to display on the screen. Valid
only for the show command.
INTEGER: 1-100000000 (Default = 100000000).
Valid for Command: show
Default Value: 100000000
Possible Value: [1_100000000]
Parser: DecimalParser
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Description: Specifies whether to display data on the screen in a sorted order.
Valid only for the show command.
VARCHAR(1024): 1-1024 (Default = all rows are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-43