Cisco BTS 10200 Softswitch Manual page 245

Chapter 4 Command Line Interface Routing
If the call type is TNS, the Cisco BTS 10200 Softswitch will use the carrier routing to select the call
Step 9
route and to select the call route and to route the call. If the carrier routing is not found, the Cisco BTS
10200 Softswitch will user the dial plan to select the call route and to route the call.
Examples:
Dial-Plan
DN2sub
Step 10 If the call type is TG carrier, the Cisco BTS 10200 Softswitch will use the carrier routing to select the
call route and to route the call. If the carrier routing is not found, the Cisco BTS 10200 Softswitch will
user the dial plan to select the call route and to route the call.
If the call type is TG SP, the Cisco BTS 10200 Softswitch will the SP routing to select the call route and
Step 11
to route the call. If the SP routing is not found, the Cisco BTS 10200 Softswitch will user the dial plan
to select the call route and to route the call.
Examples:
Dial-Plan
DN2sub
OL-8001-10
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Routing Types
4-5