Cisco BTS 10200 Softswitch Manual page 292

Provisioning a Dial Plan with the Command Line Interface
FNAME
ID
LIMIT
MASTER
NOD
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
6-4
Description: Primary key. Foreign key: Feature table. Type of screening
feature.
VARCHAR(16): 1-16 ASCII characters. Permitted values are:
SCR--Selective call rejection
SCF--Selective call forwarding
SCA--Selective call acceptance
DRCW--Distinctive ringing
NSA--No Solicitation
Valid for Command: add, change, audit, sync, show
Possible Value: [1_16]
Parser: TextNoCaseParser
Description: Network ID of a specific CA or FS. Valid for the download to
Standby CA or FS command. VARCHAR(8):1-8 ASCII characters
consisting of any valid, provisioned CA, FSPTC, or FSAIN ID.
Valid for Command: add, change, show, delete, audit, sync
Mandatory: add, change, delete
Possible Value: [1_16]
Parser: TextParser
Description: Specifies the number of rows to display on the screen. Valid
only for the show command.
INTEGER: 1-100000000 (Default = 100000000).
Valid for Command: show
Default Value: 100000000
Possible Value: [1_100000000]
Parser: DecimalParser
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Description: Primary key. Foreign key: Nature of Dial table. Nature of dial.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, audit, sync, show
Mandatory: add
Possible Value: VSC, ATTENDANT_ACCESS, POTS_ACCESS,
EXTENSION, SPEED_CALL
Parser: TextParser
Chapter 6 Provisioning Dial Plans
OL-8001-10