Cisco BTS 10200 Softswitch Manual page 91

Chapter 1 Digit Translations
TG9
TGN1_ID
TGN10_ID
TGN2_ID
TGN3_ID
TGN4_ID
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Valid for Command: add, change, audit, sync, show
Possible Value: [1_20]
Parser: TextParser
Description: Foreign key: Trunk Group table. The first trunk group within
the route. The trunk groups are searched in the order specified unless least
cost routing (LCR) applies. If LCR is applied, the Call Agent reads the cost
for each trunk group from the trunk-grp table and selects trunks from the
least expensive trunk group to the most expensive one.
This field can also be provisioned using tg instead of tgn-id. The EMS looks
up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Description: Foreign key: Trunk Group table. The tenth trunk group within
the route. This field can also be provisioned using tg instead of tgn-id. The
EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Description: Foreign key: Trunk Group table. The second trunk group within
the route. This field can also be provisioned using tg instead of tgn-id. The
EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Description: Foreign key: Trunk Group table. The third trunk group within
the route. This field can also be provisioned using tg instead of tgn-id. The
EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Description: Foreign key: Trunk Group table. The fourth trunk group within
the route. This field can also be provisioned using tg instead of tgn-id. The
EMS looks up the tgn-id based on the trunk group and then provisions it.
INTEGER: 1-99999999.
Valid for Command: add, audit, change, show
Possible Value: [0_99999999]
Parser: DecimalParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-75