Cisco BTS 10200 Softswitch Manual page 55

Chapter 1 Digit Translations
ID
INTL_DIAL_PLAN_
ID
LIMIT
MASTER
NANP_DIAL_PLAN
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: Primary key. The NOA Route Profile id.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, delete, show, audit, sync
Mandatory: add, change, delete
Possible Value: [1_16]
Parser: TextParser
Description: Foreign key: International Dial Plan Profile table. Specifies
which international dial plan ID to use with the dial plan ID. If this field is
null, the Call Agent uses the default intl-dial-plan-id values from
Appendix A, "Call Agent and Feature Server Configurable Parameters"
in the Call Agent Configuration table.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_16]
Parser: TextParser
Description: Specifies the number of rows to display on the screen. Valid
only for the show command.
INTEGER: 1-100000000 (Default = 100000000).
Valid for Command: show
Default Value: 100000000
Possible Value: [1_100000000]
Parser: DecimalParser
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Description: Specifies whether the dial plan is in North American Number
Plan (NANP) format. If it is an NANP dial plan, the EMS enforces NANP
rules—the digit string must be in the format NXX-NXX-XXXX.
CHAR(1): Y/N (Default = Y).
Valid for Command: add, audit, change, show
Default Value: Y
Possible Value: Y, N
Parser: BooleanParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-39