Cisco BTS 10200 Softswitch Manual page 174

Policy Based Flexible Routing
STOP_TIME6
STOP_TIME7
STOP_TIME8
STOP_TIME9
TARGET
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
2-58
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: The time in hours and minutes (24-hour clock) that this policy
ends (time of day provisioning).
CHAR(5): HH:MM
Valid for Command: add, change, audit, sync, show
Possible Value: [5_5]
Parser: TimeParser
Description: Specifies the network element to receive the request.
VARCHAR(5): 1-5 ASCII characters. Permitted values are:
CA—Network identifier of a Call Agent.
FSPTC (POTS/Tandem/Centrex Feature Server)—Network identifier of a
specific Feature Server.
FSAIN (AIN Feature Server)—Network identifier of AIN Feature Servers.
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Chapter 2 Routing
OL-8001-10