Cisco BTS 10200 Softswitch Manual page 87

Chapter 1 Digit Translations
NEXT_ACTION
ORDER
PFX_DIGITS1
PFX_DIGITS10
PFX_DIGITS2
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: Specifies what action to perform after all trunk groups within a
route are exhausted.
VARCHAR(16): 1-16 ASCII characters. Permitted values are:
NONE (Default)—No next action. Play standard no route to destination
announcement.
ALT-ROUTE—Use alternate route.
ANNC—Use an announcement ID.
OVERFLOW-DN—Reroute the call using the overflow DN.
Valid for Command: add, audit, change, show, sync
Default Value: NONE
Possible Value: NONE, ALT_ROUTE, ANNC, ENUM_REROUTE
Parser: TextParser.toUpperCase()
Description: Specifies whether to display data on the screen in a sorted order.
Valid only for the show command.
VARCHAR(1024): 1-1024 (Default = all rows are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Description: Digits to be prefixed. Digits are prefixed after the number of
specified digits are deleted.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_10]
Parser: TextParser
Description: Digits to be prefixed for tgn10-id. Digits are prefixed after the
number of digits specified have been deleted.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_10]
Parser: TextParser
Description: Digits to be prefixed for tgn2-id. Digits are prefixed after the
number of digits specified have been deleted.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_10]
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-71