Cisco BTS 10200 Softswitch Manual page 207

Chapter 2 Routing
POLICY_TYPE8
POLICY_TYPE9
PREFIX1
PREFIX10
PREFIX2
OL-8001-10
Description: See policy-type1.
VARCHAR(7): 1-7 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: ODR, TOD, PERCENT, PREFIX, OLI, POP, ROUTE, NXX,
REGION
Parser: TextParser
Description: See policy-type1.
VARCHAR(7): 1-7 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: ODR, TOD, PERCENT, PREFIX, OLI, POP, ROUTE, NXX,
REGION
Parser: TextParser
Description: Type of call being provisioned.
VARCHAR(10): 1-10 ASCII characters. Permitted values are:
NATIONAL—National call (1+)
INTL—International call (011+)
OPERATOR—Operator call (0-, 00)
NAT-OPR—National operator call (0+ call)
INTL-OPR—International operator call (01+ call)
TOLL-FREE—Toll free call (8XX)
CUT-THRU—Cut-through call (101XXXX+#)
DA—Directory assistance call
Valid for Command: add, change, audit, sync, show
Mandatory: add
Possible Value: NATIONAL, INTL, OPERATOR, NAT_OPR, INTL_OPR,
TOLL_FREE, CUT_THRU, DA
Parser: TextParser
Description: See prefix1.
VARCHAR(10): 1-10 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: NATIONAL, INTL, OPERATOR, NAT_OPR, INTL_OPR,
TOLL_FREE, CUT_THRU, DA
Parser: TextParser
Description: See prefix1.
VARCHAR(10): 1-10 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: NATIONAL, INTL, OPERATOR, NAT_OPR, INTL_OPR,
TOLL_FREE, CUT_THRU, DA
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Policy Based Flexible Routing
2-91