Cisco BTS 10200 Softswitch Manual page 77

Chapter 1 Digit Translations
SCRIPT_ID
START_ROW
TARGET
ZERO_PLUS
OL-8001-10
Automatic Number Identification/Dialed Number Identification Service Manipulation
Description: Foreign key: Script table. Specifies a script identifier. A script
id is required if route-type=script. The specified script is executed on the end
point to perform IVR functions.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_16]
Parser: TextParser
Description: Specifies to begin displaying data on the screen at a specific
row. Valid only for the show command.
INTEGER: 1-100000000 (Default = 1).
Valid for Command: show
Default Value: 1
Possible Value: [1_100000000]
Parser: DecimalParser
Description: Specifies the network element to receive the request.
VARCHAR(5): 1-5 ASCII characters. Permitted values are:
CA—Network identifier of a Call Agent.
FSPTC (POTS/Tandem/Centrex Feature Server)—Network identifier of a
specific Feature Server.
FSAIN (AIN Feature Server)—Network identifier of AIN Feature Servers.
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Description: Specifies if 0+ calls are allowed.
CHAR(1): Y/N (Default = N).
Y—0+ calls are allowed to this destination.
N—0+ calls are not allowed to this destination.
Valid for Command: add, change, audit, sync, show
Default Value: N
Possible Value: Y, N
Parser: BooleanParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-61