Cisco BTS 10200 Softswitch Manual page 79

Chapter 1 Digit Translations
Upgrade Impact:
•
•
•
•
•
•
Syntax Description ALT_ROUTE_ID
ANI_DIGMAN_ID1
ANI_DIGMAN_ID10
ANI_DIGMAN_ID2
ANI_DIGMAN_ID3
OL-8001-10
Set TYPE to ROUTE.
For each entry in ROUTE, add an entry into POLICY_PROFILE table.
If NEXT_ACTION = ENUM_REROUTE, set the value to NONE.
If NEXT_ACTION IS ALT_ROUTE, then set ANNC_ID AND OVERFLOW_DN to NULL
If NEXT_ACTION IS ANNC, then set ALT_ROUTE_ID AND OVERFLOW_DN to NULL
If NEXT_ACTION IS OVERFLOW_DN, then set ANNC_ID AND ALT_ROUTE_ID to NULL
Description: Foreign key: Route table. An alternate route to be used if all the
trunk groups in this route are busy.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_16]
Parser: TextParser
Description: Foreign key: Digman Profile table. ANI (calling party number)
digit manipulation ID.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_16]
Parser: TextParser
Description: Foreign key: Digman Profile table. ANI (calling party number)
digit manipulation ID.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_16]
Parser: TextParser
Description: Foreign key: Digman Profile table. ANI (calling party number)
digit manipulation ID.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_16]
Parser: TextParser
Description: Foreign key: Digman Profile table. ANI (calling party number)
digit manipulation ID.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, audit, change, show
Possible Value: [1_16]
Parser: TextParser
Automatic Number Identification/Dialed Number Identification Service Manipulation
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-63