Cisco BTS 10200 Softswitch Manual page 202

Policy Based Flexible Routing
LIMIT
MASTER
ORDER
PLATFORM_STATE
POLICY_ID1
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
2-86
Description: Specifies the number of rows to display on the screen. Valid
only for the show command.
INTEGER: 1-100000000 (Default = 100000000).
Valid for Command: show
Default Value: 100000000
Possible Value: [1_100000000]
Parser: DecimalParser
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Description: Specifies whether to display data on the screen in a sorted order.
Valid only for the show command.
VARCHAR(1024): 1-1024 (Default = all rows are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Description: State of an active or standby system shared memory database;
use to audit an active or standby system shared memory database. Valid for
the audit database and audit table name commands.
VARCHAR(7): 1-7 ASCII characters. Permitted values are:
ACTIVE (Default)—System is active (currently running).
STANDBY—System is in standby mode.
EMS—Audits the active EMS to the standby EMS.
Valid for Command: sync, audit
Default Value: ACTIVE
Possible Value: ACTIVE, STANDBY
Parser: TextParser
Description: ID of the Policy or Route table that matches the policy type.
Indexes the ID to the type.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, audit, sync, show
Mandatory: add
Possible Value: [1_16]
Parser: TextParser
Chapter 2 Routing
OL-8001-10