Cisco BTS 10200 Softswitch Manual page 64

Automatic Number Identification/Dialed Number Identification Service Manipulation
MIN_DIGITS
NOA
ORDER
PFX_DIGITS
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-48
Description: Minimum number of digits required for a call.
SMALLINT: 1-64 (Default = 10).
Valid for Command: add, audit, change, show, sync
Mandatory: add
Default Value: 10
Possible Value: [1_64]
Parser: DecimalParser
Description: Primary key. Nature of address. Use the Variable Default table
to change the default value if required. Use noa=unknown for ESRN
numbers.
VARCHAR(16): 1-16 ASCII characters. Permitted values are:
NATIONAL (Default)—National Number.
SUBSCRIBER—Subscriber Number.
UNKNOWN—Nature of address is unknown.
Valid for Command: add, audit, change, delete, show, sync
Mandatory: add, change, delete
Default Value: NATIONAL
Possible Value: NATIONAL, SUBSCRIBER, UNKNOWN
Parser: TextParser
Description: Specifies whether to display data on the screen in a sorted order.
Valid only for the show command.
VARCHAR(1024): 1-1024 (Default = all rows are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Description: Specifies the digits to prefix.
VARCHAR(16): 1-16 numeric characters.
Valid for Command: add, audit, change, show, sync
Possible Value: [1_16]
Parser: DigitParser
Chapter 1 Digit Translations
OL-8001-10