User Inactivity Modify And User Inactivity Display Commands; User Passwd Set Command - Cisco 15216 EDFA2 Operation Manual

User Commands

6.7.5 user inactivity modify and user inactivity display Commands

Command
user inactivity modify or user inactivity display
Syntax Description user inactivity modify levelvalue or user inactivity display
Inactivity is the length of time of user inactivity before the user is automatically logged off. Type the
user inactivity modify command to change the inactivity values. Type the user inactivity display
command to display the current inactivity values.
The default inactivity values for the read, read_write, and read_write_admin user access levels are 60,
30, and 15 minutes, respectively. Possible values are 0 to 99 (in minutes). A value of 0 means no timeout.
See
Example 6-34 user inactivity modify Command
ash:hostname:ONS15216 EDFA2> user inactivity modify read 75
Example 6-35 user inactivity display Command
ash:hostname:ONS15216 EDFA2> user inactivity display
Mode
read_write_admin 15
read_write
read

6.7.6 user passwd set Command

To restrict access to the ONS 15216 EDFA2, use the user passwd set command to change the default
user password.
displays the user passwd set username command for changing another user's password.
The password must be an ASCII string of up to 10 characters, where at least 2 are non-alphabetic
characters with at least one special character. Special characters are +, #, and %, as defined in Telcordia
GR-831-CORE. With the exception of the read_write_admin level user, the user can only modify their
own password.
Example 6-36 Changing Current User's Password
ash:hostname:ONS15216 EDFA2> user passwd set
Password =
*****
New Password =
*******
Confirm New Password =
*******
Example 6-37 Changing Another User's Password
ash:hostname:ONS15216 EDFA2> user passwd set jdoe
Password =
****
Cisco ONS 15216 EDFA2 Operations Guide
6-28
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Example 6-34 and Example
Inactivity
30
75
Example 6-36
6-35.
displays the user passwd set syntax for a current user.
Chapter 6 ASH Commands
Example 6-37
78-16033-01